The health and safety of everyone at Channellock is extremely important to us. Read about our COVID-19 response here.

CHANNELLOCK® 2012 Oil Filter/PVC Pliers with angled head combine the strength and reliability of our iconic Tongue & Groove Pliers with the special needs of large PVC and oil filters. Includes a 30-degree angled head which allows for access to areas that used to be impossible to reach. The 2012 has a jaw capacity of 2-1/2 in. to 3-3/4 in. and removes stubborn oil filters from cars, trucks, motorcycles, ATVs and lawn and garden equipment. These pliers include an added SAFE-T-STOP® feature to prevent finger pinch with the combination of a lower jaw design and an expanded reinforcing rib preventing unwanted handle contact. CHANNELLOCK® Oil Filter/PVC Pliers are made in USA and forged from high carbon U.S. steel that is specially coated for ultimate rust prevention.

  • ANGLED HEAD at 30-degrees for hard-to-reach areas
  • SPECIALLY DESIGNED for use on oil filters, PVC fittings, conduit, and sink basket strainers
  • ADJUSTS to fit most car and light truck oil filters
  • RELIABLE PERMALOCK® fastener eliminates nut and bolt failure with increased joint strength
  • FORGED high carbon U.S. steel for ultimate strength and durability is specially coated for ultimate rust prevention
  • Patented SAFE-T-STOP® feature prevents finger pinch
  • CHANNELLOCK BLUE® grips for comfort
  • 100% MADE IN USA

CHANNELLOCK® Upright Aviation Snips make easy work when cutting in overhead or tight spaces. Easily cut curves and straight cuts with 24ga cold rolled steel. CHANNELLOCK® Aviation Snips are 100% made in USA and the blades are forged from alloy steel for durability and strength. The combination of precision machined serrations on cutting blades and 8:1 compound leverage with high tensile steel handles greatly optimizes cutting performance with minimal effort.

  • UPRIGHT BLADES allow for easy work in overhead or tight spaces
  • DIRECTION: Cuts right in tight, confined, and overhead spaces
  • CUTTING CAPACITY: 24ga cold rolled steel
  • FORGED molybdenum alloy steel for ultimate strength and durability
  • PRECISION formed blades for complete cutting strokes and accurate trim cuts
  • 8:1 COMPOUND joint action for maximum cutting power with minimum effort
  • DURABLE long lasting double overwind spring reduces hand fatigue
  • HIGH TENSILE steel handles
  • COMFORT grips designed for durability and comfort
  • 100% MADE IN USA
24 GA. CR STEEL

As a first responder, your job requires tools that are reliable and versatile. The CHANNELLOCK® 86 9" Rescue Tool pries open windows and doors, cuts wires and cables easily, shuts off gas safety valves and loosens hose couplings. The new design of the 86 incorporates our innovative XLT™ joint, which requires considerably less force to cut than traditional high leverage designs, as well as the spring and lock feature allowing for easy one-hand operation in high-stress situations. U.S. Patent No. 8,065,939.

  • XLT™ Xtreme Leverage Technology means considerably less force required to cut than traditional high leverage designs
  • Spring and lock feature allows easy one-hand operation
  • Fits securely in bunker pockets
  • Laser heat-treated cutting edges cut hardened steel, wires and cables easily
  • Spanner wrench tightens and loosens up to 5" hose couplings
  • Pries open windows and doors
  • Shuts off gas safety valves
  • Aggressive crosshatch pattern on jaws grips work tightly and the pipe grip design accommodates many shapes

CHANNELLOCK® Bulldog Snips offer dual-handed gripping power, resulting in cleaner curved and straight cuts with minimum effort on heavy duty notch cuts. CHANNELLOCK® Aviation Snips are 100% Made in USA and the blades are forged from molybdenum alloy steel for durability and strength. The combination of precision machined serrations on cutting blades, 8:1 compound leverage and high tensile steel handles greatly optimizes cutting performance with less effort.

  • DIRECTION: Cuts straight on heavy duty material, thick or multiple layers, seams, notch cuts, etc.
  • CUTTING CAPACITY: 16ga cold rolled steel, and 18ga stainless
  • FORGED molybdenum alloy steel for ultimate strength and durability
  • PRECISION formed blades for complete cutting strokes and accurate trim cuts
  • 8:1 COMPOUND joint action for maximum cutting power with minimum effort
  • DURABLE long lasting double overwind spring reduces hand fatigue
  • HIGH TENSILE steel handles
  • COMFORT grips designed for durability and comfort
  • 100% MADE IN USA
16 GA. CR STEEL
18 GA. STAINLESS

CHANNELLOCK® Upright Aviation Snips make easy work when cutting in overhead or tight spaces. Easily cut curves and straight cuts with 24ga cold rolled steel. CHANNELLOCK® Aviation Snips are 100% made in USA and the blades are forged from alloy steel for durability and strength. The combination of precision machined serrations on cutting blades and 8:1 compound leverage with high tensile steel handles greatly optimizes cutting performance with minimal effort.

  • UPRIGHT BLADES allow for easy work in overhead or tight spaces
  • DIRECTION: Cuts wide left/right curved and straight
  • CUTTING CAPACITY: 24ga cold rolled steel
  • FORGED molybdenum alloy steel for ultimate strength and durability
  • PRECISION formed blades for complete cutting strokes and accurate trim cuts
  • 8:1 COMPOUND joint action for maximum cutting power with minimum effort
  • DURABLE long lasting double overwind spring reduces hand fatigue
  • HIGH TENSILE steel handles
  • COMFORT grips designed for durability and comfort
  • 100% MADE IN USA
24 GA. CR STEEL

CHANNELLOCK® Offset Snips are the ultimate tool in tight spaces. Easily cut curves and straight cuts with 18ga cold rolled and 22ga stainless steel while the offset design directs material away from the operator. CHANNELLOCK® Aviation Snips are 100% made in USA and the blades are forged from molybdenum alloy steel for durability and strength. The combination of precision machined serrations on cutting blades and 8:1 compound leverage with high tensile steel handles greatly optimizes cutting performance with minimal effort.

  • OFFSET BLADES direct material away from the operator
  • DIRECTION: Cuts tight left curves and straight
  • CUTTING CAPACITY: 18ga cold rolled steel, and 22ga stainless
  • FORGED molybdenum alloy steel for ultimate strength and durability
  • PRECISION formed blades for complete cutting strokes and accurate trim cuts
  • 8:1 COMPOUND joint action for maximum cutting power with minimum effort
  • DURABLE long lasting double overwind spring reduces hand fatigue
  • HIGH TENSILE steel handles
  • COMFORT grips designed for durability and comfort
  • 100% MADE IN USA
18 GA. CR STEEL
22 GA. STAINLESS

CHANNELLOCK® Offset Snips are the ultimate tool in tight spaces. Easily cut curves and straight cuts with 18ga cold rolled and 22ga stainless steel while the offset design directs material away from the operator. CHANNELLOCK® Aviation Snips are 100% made in USA and the blades are forged from molybdenum alloy steel for durability and strength. The combination of precision machined serrations on cutting blades and 8:1 compound leverage with high tensile steel handles greatly optimizes cutting performance with minimal effort.

  • OFFSET BLADES direct material away from the operator
  • DIRECTION: Cuts tight right curves and straight
  • CUTTING CAPACITY: 18ga cold rolled steel, and 22ga stainless
  • FORGED molybdenum alloy steel for ultimate strength and durability
  • PRECISION formed blades for complete cutting strokes and accurate trim cuts
  • 8:1 COMPOUND joint action for maximum cutting power with minimum effort
  • DURABLE long lasting double overwind spring reduces hand fatigue
  • HIGH TENSILE steel handles
  • COMFORT grips designed for durability and comfort
  • 100% MADE IN USA
18 GA. CR STEEL
22 GA. STAINLESS